- Remove Solar Blanket - Roll Up or fold
- Backwash filter/Rinse/Set for Winter
- Pump down water - 3" below return jets
- Remove filter drain plug, gauge & glass
- Remove backwash hose
- Open pump & remove drain plugs
- Blow out suction and return lines
- Install skimmer gizzmo + 1 cup of antifreeze
- Bag skimmer cover and zip tie
- Blow out solar if applicable
- Plug return jets
- Remove ladder(s)
- Remove light(s) and sink
- Add winterizing chemicals (charged for extra)
- Heater - disconnect flow switch if not manifold monted.
- Turn off gas supply to heater at shut off valve
- Set heater gas valve to off
- Remove drain plugs for blow out and replace.
- Cover varivalve with garbage bag
- Install winter cover
Note: Technicians opening the pool will not turn on gas valves, start heaters or light heater pilots. This can be arranged with our licensed gas technician at an extra cost.